HP 2820

To change the device control panel key-press volume
The key-press volume controls the sound that is made when a device control-panel button is
pressed.
1. Press M
ENU .
2. Use the < or the > button to select System setup, and then press E
NTER .
3. Use the < or the > button to select Volume settings, and then press E
NTER .
4. Use the < or the > button to select Key Press volume, and then press E
NTER .
5. Use the < or the > button to select Off, Soft, Medium, or Loud.
6. Press E
NTER to save your selection.
Note
The factory-set default for the device control panel key-press volume is Soft.
ENWW Using the device control panel 35