HP 2910 Series User Manual

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
Shippable solution.
HP 2910-24G al Switch J9145A
20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
2 - Module Slots
1U - Height
See Configuration
Note:1, 2, 3
PDU Cable NA/MEX/TW/JP J9145A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9145A#B2C
C15 PDU Jumper Cord (ROW)
HP 2910-48G al Switch J9147A
44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
2 - Module Slots
1U - Height
See Configuration
Note:1, 2, 3
PDU Cable NA/MEX/TW/JP J9147A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9147A#B2C
C15 PDU Jumper Cord (ROW)
HP 2910-24G-PoE+ al Switch J9146A
20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
2 - Module Slots
1U - Height
See Configuration
Note:1, 2, 3
PDU Cable NA/MEX/TW/JP J9146A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW J9146A#B2C
C15 PDU Jumper Cord (ROW)
HP 2910-48G-PoE+ al Switch J9148A
QuickSpecs
HP 2910 al Switch Series
Configuration
DA - 13280 North America — Version 20 — December 12, 2013 Page 6

HP 2910 Series Specifications

General

Switching Capacity	Up to 176 Gbps
Layer	Layer 3
MAC Address Table Size	16, 000 entries
Throughput	Up to 130.9 Mpps
Power over Ethernet	PoE+ (IEEE 802.3at) on PoE+ models
Stackable	Yes (up to 4 switches)
Management	Web, CLI, SNMP
Routing Protocol	RIP
Power Supply	Internal (redundant option available)
Form Factor	1U rack-mountable
Security features	ACLs, 802.1X, RADIUS, TACACS+
Power consumption	Varies by model (e.g., 68W for 2910-24G, 460W for 2910-24G-PoE+)
Operating temperature	32°F to 113°F (0°C to 45°C)
Latency	<5 microseconds