EasyManuals Logo
Home>HP>Switch>2915 series

HP 2915 series User Manual

HP 2915 series
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
HP 2915-8G-PoE Switch
(J9562A)
Included accessories
1 HP X520 1U Power Adapter Shelf (J9701A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 PoE ports; Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX:
half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T, IEEE 802.3af PoE)
2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10BASE-T; an IEEE 802.3u Type 100BASE-TX; an IEEE 802.3ab 1000BASE-T Gigabit Ethernet); or an SFP
slot (for use with SFP transceivers)
1 RJ-45 serial console port
Physical characteristics
Dimensions
10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height)
Weight
3.66 lb (1.66 kg) including power adapter and power cord
Memory and processor
Processor
Freescale PowerPC 8313 @ 333 MHz, 32 MB flash, 128 MB DDR2 SDRAM;
packet buffer size: 512 KB dynamically all
Mounting and enclosure
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet; horizontal surface mounting, wall
mounting
Performance
100 Mb Latency
< 5.3 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.7 µs (LIFO 64-byte packets)
Throughput
14.8 million pps
Switching capacity
20 Gb/s
MAC address table size
8000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 0 dB, Pressure: 0 dB
Electrical characteristics
Description
Use only the external power adapter module (5070-6082, PA1 AC adapter)
supplied with this product.
Maximum heat
dissipation
89 BTU/hr (93.9 kJ/hr)
AC voltage
100-240 VAC
Current
1.5 A
Maximum power rating
86 W
Idle power
11 W
PoE power
67 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
QuickSpecs
HP 2915 Switch Series
Technical Specifications
DA - 13672 Worldwide — Version 8 — December 9, 2013
Page 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 2915 series and is the answer not in the manual?

HP 2915 series Specifications

General IconGeneral
BrandHP
Model2915 series
CategorySwitch
LanguageEnglish

Related product manuals