Note 5
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the CTO Switch Chassis needs to
integrate (with #0D1) to the HP Rack.
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Internal Power Supplies
System (std 1 // max 1) per switch enclosure
HP X331 165W 100-240VAC to 12VDC PS
J9739A#0D1
includes 1 x c15, 165w (Spare Only)
See
Configuration
Note:1, 3, 4
PDU CABLE NA/MEX/TW/JP
J9739A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9739A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9739A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 575W 100-240VAC to 54VDC PS
J9738A#0D1
includes 1 x c15, 575w (Spare Only)
See
Configuration
Note:2, 3, 4
PDU CABLE NA/MEX/TW/JP
J9738A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9738A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9738A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 1050W 100-240VAC to 54VDC PS
J9737A
includes 1 x c15, 1050w (Spare or Upgrade Only)
See
Configuration
Note:2, 3, 4
QuickSpecs
HP 2920 Switch Series
Configuration
DA - 14499 Worldwide — Version 10 — December 9, 2013
Page 13
To Next Page
Loading...
