NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 575W 100-240VAC to 54VDC PS
J9738A
includes 1 x c15, 575w
See Configuration
Note:2
PDU CABLE NA/MEX/TW/JP
J9738A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9738A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9738A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 1050W 100-240VAC to 54VDC PS
J9737A
includes 1 x c15, 1050w
See Configuration
Note:2
PDU CABLE NA/MEX/TW/JP
J9737A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9737A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9737A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules
Note 1
Can take up to Three internal power supplies. (J9737A, J9738A and J9739A) System (std 0 // max
3) User Selection (min 1 // max 3) per Power Supply enclosure. Mixing or matching of the 3
different power supplies is supported in the Chassis.
Note 2
Localization required on orders without #B2B, #B2C or #B2E options.
Note 3
No Localization. Localization is on the internal Power supplies.
Note 4
Up to eight (8) Switch Chassis can be connected to this External Redundant Power Source.
Power supply slot 1 supports up to 4 cables
Power supply slot 2 supports up to 2 cables
Power supply slot 3 supports up to 2 cables
Supported on J9726A, J9727A, J9728A, J9729A and J9836A switches only.
Note 5
If this RPS/EPS is installed in HP Universal Racks, Then the J9583A#0D1 is required
QuickSpecs
HP 2920 Switch Series
Configuration
DA - 14499 Worldwide — Version 10 — December 9, 2013
Page 25
To Next Page
Loading...
