Remarks:
For J9726A, and J9728A, the power supply in J9805A must be J9739A (165W).
For J9727A and J9729A, the power supply in J9805A must be J9737A (1050W) or J9738A (575W).
For J9836A, the power supply in J9805A must be J9737A (1050W).
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)
External/Redundant Power Cables
HP 640 EPS/RPS 1m Cable
J9806A
See Configuration
Note:1
Configuration Rules
Note 1
1, 2, 3 or 4 cables per AC Power Supply used with J9805A supported. System (std 0 // max 8) User
Selection (min 1 // max 8) per Power Supply enclosure.
Power supply slot 1 supports up to 4 cables
Power supply slot 2 supports up to 2 cables
Power supply slot 3 supports up to 2 cables
QuickSpecs
HP 2920 Switch Series
Configuration
DA - 14499 Worldwide — Version 10 — December 9, 2013
Page 26
To Next Page
Loading...
