Removal and Replacement Procedures
Maintenance and Service Guide 5–29
5.13 RTC Battery
✎
The RTC battery is included with the system board, spare part
number 435585-001.
1. Prepare the docking station for disassembly (refer to
Section 5.3), and remove the following components:
❏ Top cover (Section 5.5)
❏ Docking LED board and lens (Section 5.6)
❏ Hard drive (Section 5.7)
❏ Fan (Section 5.8)
❏ Backup button board (Section 5.9)
❏ Front enclosure (Section 5.11)
2. Remove the RTC battery from the socket on the
system board.
Removing the RTC Battery
Reverse the above procedure to install the RTC battery. Make
sure the RTC battery is installed with the “+” sign facing up.
To Next Page
Loading...
