5–30 Maintenance and Service Guide
Removal and Replacement Procedures
5.14 MultiBay II Assembly
1. Prepare the docking station for disassembly (refer to
Section 5.3), and remove the following components:
❏ Top cover (Section 5.5)
❏ Docking LED board and lens (Section 5.6)
❏ Hard drive (Section 5.7)
❏ Fan (Section 5.8)
❏ Backup button board (Section 5.9)
❏ Front enclosure (Section 5.11)
MultiBay II Assembly
Spare Part Number Information
MultiBay II assembly (includes MultiBay II top and
bottom brackets, housing, and eject assembly)
435600-001
MultiBay II connector board (includes MultiBay II
connector board cable and MultiBay II LED board)
435583-001
Heat sink 436855-001
Locking linkage 435600-001
To Next Page
Loading...
