Select To do this
Processor C4 State Enable/disable the processor C4 sleep state
Boot Options Set the following boot options:
● f10 and f12 Delay (sec.)―set the delay for the f10 and f12
functions of the Setup Utility in intervals of 5 seconds each (0, 5,
10, 15, 20)
●
Internal Network Adapter boot―enable/disable boot from the
internal network adapter.
●
Boot Order―set the boot order for the following:
◦
Internal hard drive (select models only)
◦
USB floppy drive
◦
USB CD/DVD ROM drive
◦ USB flash drive
◦ USB hard drive
◦ USB card reader
◦
Network adapter
NOTE: Only the devices that are available on the system
appear in the boot order menu.
Diagnostics menu
Select To do this
Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive
Memory Test Run a diagnostic test on the system memory
68 Chapter 5 Computer Setup ENWW
To Next Page
Loading...
Need help?
General
