Need help?Do you have a question about the HP 3105m and is the answer not in the manual?
Identifies and describes top-mounted components like the ClickPad TouchPad.
Details components located on the front of the notebook, such as speakers.
Identifies and describes components on the right side, including ports and slots.
Details components on the left side, including power connector and vents.
Describes components integrated into the display assembly, like webcam and antennas.
Identifies components on the bottom of the notebook, such as battery and SIM card slot.
Details the location and function of WLAN and WWAN antennas.
Describes external hardware components like power cords and AC adapters.
Explains the importance and content of the service tag for ordering parts.
Illustrates and lists the main internal components of the computer.
Details the individual parts that make up the display assembly.
Identifies and lists available mass storage devices like hard drives.
Lists various other parts not categorized elsewhere, such as speakers and kits.
Provides a cross-reference of spare part numbers and their corresponding descriptions.
Outlines necessary tools and general precautions before disassembly.
Details procedures to prevent damage from electrostatic discharge (ESD).
Provides guidelines for safely packaging and transporting computer components.
Specifies requirements for a safe, static-free work environment for repairs.
Recommends specific equipment and materials for preventing electrostatic damage.
How to identify and use the service tag for component replacement.
Procedure for removing and replacing computer feet.
Step-by-step instructions for removing and installing the battery.
Procedure for removing and installing the SIM card.
Detailed steps for removing and installing the hard drive.
Instructions for removing and replacing the Wireless Wide Area Network module.
Steps for removing and installing the Wireless Local Area Network module.
Procedure for accessing and replacing memory modules.
Step-by-step guide for keyboard removal and installation.
Instructions for removing and replacing the computer's top cover.
Procedure for removing and replacing the power button board.
Steps for removing and installing the ClickPad TouchPad button board.
Guide for removing and replacing the speaker assembly.
Detailed steps for removing the entire display assembly.
Instructions for removing and replacing the computer's system board.
Procedure for removing and installing the Real-Time Clock (RTC) battery.
Steps for removing and replacing the heat sink assembly.
Guide for removing and installing the power connector.
Instructions for removing the RJ-45 connector cover.
Procedure for removing and installing the RJ-45 network connector.
Steps for removing and replacing the computer's cooling fan.
Guide to configuring computer settings using the BIOS utility in Windows 7.
How to access the computer's BIOS Setup Utility.
General information on navigating and using the BIOS Setup Utility.
Steps to change the language displayed within the Setup Utility.
Explains keyboard navigation and selection methods within the BIOS.
How to view system hardware and BIOS information in the Setup Utility.
Procedure to reset BIOS settings to factory defaults.
Options for saving or discarding changes and exiting the BIOS utility.
Overview of the different menus and options available in the BIOS Setup Utility.
Describes the diagnostic tools available within the computer setup.
Lists physical and electrical specifications for the computer.
Technical specifications for the notebook's display panel.
Details the technical specifications for the computer's hard drives.
Information on restoring the computer to its original factory image.
Steps to create recovery discs or a flash drive using HP Recovery Manager.
Guide on how to perform a system restore using recovery options.
Instructions for restoring from a built-in recovery partition.
Steps to restore the system using recovery discs or flash drives.
How to modify the boot sequence for recovery media.
Strategies and methods for backing up and restoring user data.
Instructions for using Windows' built-in backup and restore features.
How to create and use system restore points for system recovery.
Pin assignment details for the audio combo jack.
Pin configuration for connecting an external monitor.
Pin assignments for the RJ-45 network connector.
Pin assignments for the USB ports.
General specifications for power cord sets applicable globally.
Country-specific requirements and certifications for power cord sets.
Guidelines for proper disposal and recycling of the computer's battery.
Instructions for disassembling the display for recycling purposes.
To Next Page
General
