HP 3326A - Page 13

storage and Shipment
The following general instructions should be used for
repacking with commercially avail
able materials:
● Wrap the instrument in heavy paper or anti-static
plastic. If shipping
to a Hewlett-Packard office or service center, attach
a tag to the
instrument indicating type of service required, return address, model
number, and ful l serial number.
● Use a strong shipping container. A double-wal l carton made of
350-pound test material is adequate.
● Use a layer of shock absorbing material 70 to 100
mm (3 to 4 inch)
thick around all sides of the HP 3326A to provide firm
cushioning
and prevent movement inside of the container. Protect the control
panel with cardboard.
CAUTION
Styrene pellets in any shape should not be used as
packing material. The pellets do not adequately
cushion the instrument and do not prevent the in
strument from shifting in the carton. The pellets
also create static electricity which can damage
electronic components.
● Seal shipping container securely.
● Mark shipping container FRAGILE to ensure careful
handl ing.
● In any correspondence, refer to the instrument by model number and
ful l serial number.
INSTALLATION - 11