HP 3457A - 5-55. CALIBRATION PROCEDURES - HP 44491 A GENERAL PURPOSE RELAY ASSEMBLY; 5-56. Wiring Block Preparation

3457A
Calibration
os STEP 1
STEP 3
Figure 5-3. Terminal Block Removal
5-55.
CALIBRATION
PROCEDURES
-
HP
44491A
GENERAL
PURPOSE
RELAY
ASSEMBLY
5-56. Wiring Block Preparation
5-57.
It
will
be
necessary
to
connect
shorting
wires
to
the
Plug-In
Assembly
Wiring
Block
before
calibration
can
be
performed.
The
following
procedures
outline
the
wiring
block preparation,
WARNING
This procedure assumes that the Wiring Block is new and has no wires connected to
it. If the Wiring Block is connected to an external device, hazardous voltages may
e be exposed when the Strain Relief /Wiring Block Assembly is removed.