Need help?Do you have a question about the HP HP34401A and is the answer not in the manual?
General| Model | 34401A |
|---|---|
| DC Voltage Range | 100 mV to 1000 V |
| AC Voltage Range | 100 mV to 750 V |
| Resistance Range | 100 Ω to 100 MΩ |
| Frequency Range | 3 Hz to 300 kHz |
| Resolution | 6.5 digits |
| Interface | GPIB, RS-232 |
| Category | Digital Multimeter |
| Manufacturer | HP (Hewlett-Packard) |
| Display | Vacuum Fluorescent Display (VFD) |
Describes the key capabilities and performance of the HP34401A multimeter.
Lists the technical specifications including function ranges for the HP34401A.
Explains the front panel layout and key controls of the HP34401A multimeter.
Connect probes to HI/LO, select AC V or DCV button, and connect in parallel.
Connect leads to I/LO terminals, select DC I or AC I, and connect in series.
Connect resistor to HI/LO terminals, select Omega button, and connect in parallel.
Connect to HI/LO terminals, select Freq button, and connect in parallel.
Addresses common issues like the meter not turning on or not taking readings.
Provides resources for additional information, including the HP website and Lab Manual.
Lists the source document for the HP34401A user's manual.
To Next Page
