What to do if my HP 974A Multimeter is unable to measure current?
If your HP Multimeter is unable to measure current, it is likely due to a blown input protection fuse. Replace the fuse(s) to resolve this issue.
How to fix an HP Multimeter that won't turn on?
If your HP Multimeter won't turn on, the most likely cause is dead batteries. Replace the batteries to solve the problem.
What to do if HP Multimeter display flashes and beeps rapidly?
If the display of your HP Multimeter flashes and it beeps rapidly, it indicates that the input limit has been exceeded. Remove the test leads and press any key to reset the device.
Why is the battery annunciator on my HP Multimeter on?
If the battery annunciator is on, it means that the battery voltage is low. Replace the batteries in your HP Multimeter.
What to do if my HP Multimeter won’t turn off?
If your HP Multimeter won’t turn off, it probably means that the input limit has been exceeded. Remove the test leads and press any key to reset.
Specifies voltage limits for safety and preventing multimeter damage.
Details the multimeter's input terminals and safety shutter mechanism.
Outlines the step-by-step process for calibrating the multimeter.
Lists common problems, causes, and suggested solutions.
Provides specifications for DC voltage measurements.
Lists specifications for AC voltage measurements.
Specifies AC+DC voltage measurement parameters.
Details DC and AC current measurement specifications.
Provides specifications for resistance measurements.
Details specifications for frequency measurements.
General| Continuity Test | Yes |
|---|---|
| Diode Test | Yes |
| AC Current Range | 600.0 μA to 10.00 A |
| Display Type | LCD |
| Operating Temperature | 0 °C to 50 °C |
| Weight | 340g |
| Temperature Range | -40°C to 1000°C |
To Next Page
