DC power socket
If PoE is not available, an optional HP 3xx Cloud-Managed Access Point Universal Power
Supply(sold separately) can be used to power the HP 350.
If both PoE and DC power are available, the HP 350 draws power from the
PoE source.
Kensington lock slot
The HP 350 is equipped with a Kensington lockslot for additional security.
Reset button
You can use the reset button to return the AP to factory default settings. To reset the AP:
1. Power off the AP.
2. Press and hold the reset button using a small, narrow object, such as a paper clip.
3. Power on the AP without releasing the reset button. The LED will flash within 5
seconds.
4. Release the reset button.
The LED will flash again within 15 seconds, indicating that the reset is complete. The
AP will now continue to boot with the factory default settings.
HP 350 Cloud-Managed 802.11n AP| Installation Guide 9
To Next Page
Loading...
