HP 350 - Installing the AP; Using the Ceiling Rail Adapter

12 HP 350 Cloud-Managed 802.11n AP | Installation Guide
Obstructions and interference sources
It is critical to identify known RF absorbers, reflectors, and interference sourcesin the
environment during the installation phase. Make sure that these sources are taken into
consideration when you attach an AP to its fixed location. Examplesof sourcesthat
degrade RF performance include:
l Cement and brick
l Objects that contain water
l Metal
l Microwave ovens
l Wirelessphones and headsets
Installing the AP
12 3
Service to the HP 350 must be performed by trained service personnel only.
The HP 350 ships with two ceiling rail adapters for 9/16 inch and 15/16 inch ceiling rails.
The HP 350 AP WallMount Kit is also available.
Using the ceiling rail adapter
12 3
!
Make sure the HP 350 fits securelyon the ceiling tile rail when hanging the