Need help?Do you have a question about the HP 10000 G2 Series and is the answer not in the manual?
General| Rack Height | 42U |
|---|---|
| Weight Capacity | 2000 lbs |
| Color | Black |
| Product Type | Rack |
| Material | Steel |
| Adjustable Leveling Feet | Yes |
| Cable Management | Yes |
| Mounting Type | Floor-standing |
| Width | 24 inches |
| Height | 78.7 inches |
| Compatible Devices | HP Servers |
HP's web-based tool for rack planning and configuration.
Requirements for space, power, temperature, and airflow for optimal rack performance.
Specifies clearance needed around the rack for installation and servicing.
Guidelines for balancing power load and adhering to electrical regulations for racks.
Recommendations for maintaining a suitable environment for safe and reliable rack operation.
How rack-mountable products draw cool air and exhaust warm air; importance of ventilation.
Planning component placement considering weight, power, temperature, and airflow.
Guideline to place heaviest components at the bottom and distribute weight evenly for stability.
Important factors to consider when configuring racks with specific options.
Managing power requirements and installing PDUs before other components.
Understanding U increments, keyboard, monitor, and console switch requirements.
Details on baying kits, side panels, and stabilizer kits for rack configuration.
Key principles for safely and effectively placing components within the rack.
Stabilize rack, load heaviest first, ensure proper ground for safety.
Guidelines for loading components, using configurator, and rear clearance.
Verifying hardware received and understanding the contents of the installation kit.
Lists the necessary tools for rack installation.
Instructions for removing rack doors for component installation access.
Step-by-step guide to removing the front door of the rack.
Step-by-step guide to removing the rear doors of the rack.
Instructions for removing side panels from the rack.
Tips for stabilizing racks in multiple-rack setups.
Details on stabilizer kits and standard front feet for rack stability.
Heavy-duty feet, baying, and tie-down kits for enhancing rack stability and security.
General sequence and recommendations for installing rack-mountable components.
Using the cage nut insertion tool to install cage nuts in mounting rails.
How to route and secure cables using hook-and-loop cabling strap clips.
Steps for positioning and securing cable management brackets.
Information on available rack options and how to order them.
General overview of HP G2 rack specifications and where to find more details.
Detailed specifications for the HP 10622 G2 Rack.
Detailed specifications for the HP 10636 G2 Rack.
Detailed specifications for the HP 10642 G2 Rack.
Detailed specifications for the HP 10647 G2 Rack.
Detailed specifications for the HP 10642 1200mm Full Frame Rack.
Detailed specifications for the HP 10647 1200mm Full Frame Rack.
Detailed specifications for the HP 10842 G2 Rack.
Detailed specifications for the HP 10642 Extended Depth Rack.
Detailed specifications for the HP 10647 Extended Depth Rack.
Precautions to prevent damage from static electricity when handling parts.
Various methods for grounding to protect against static discharge.
Information to have ready before contacting HP technical support.
How to find HP authorized resellers and contact HP technical support.
To Next Page
