ENWW Motor and fans 265
Drum motor (M3) removal
1 Remove the image drive assembly. See Image drive assembly removal.
2 Remove five screws (1), remove the gear plate (2), and remove two gears (3).
Figure 6-104 Drum motor removal (1 of 3)
3 Remove the face-down delivery assembly. See Face-down delivery assembly removal.
4 Remove the laser/scanner assembly. See Laser/scanner assembly removal.
5 Disconnect two connectors (1), remove two screws (2), and remove the developing engaging
sensor unit (3) located next to the drum motor (4).
Figure 6-105 Drum motor removal (2 of 3)
1
1
2
1
3
4
3
1
2
1
To Next Page
Loading...
