HP 3500 Series - Page 338

324 Troubleshooting ENWW
Note Not all messages are described in the tables; those messages that are not listed are self-explanatory.
UNAUTHORIZED SUPPLY
IN USE
alternates with
Ready
The printer has detected that a non-HP
supply is currently installed and press
(override) was pressed.
If you believe you purchased an HP supply,
please call the HP fraud hotline at
1-877-219-3183.
Service or repairs required as a result of
using non-HP supplies are not covered under
HP warranty.
UNSUPPORTED DATA ON
<FS> DIMM IN SLOT X
alternates with
To clear press
HP 3700 only.
The data on the DIMM is not supported
(although the DIMM itself may be
supported).
Press to clear this message.
or
Press Stop to continue printing.
USE TRAY X
<TYPE> <SIZE>
The printer is offering a selection of
alternate paper to use for the print job.
1. If desired, use and to highlight a
different size or type, and then press to
select the size or type.
2. Press
to return to the previous size or
type.
Wait for printer
to reinitialize
Settings have been changed before
the printer automatically restarts, or
external device modes have changed.
No action necessary.
Table 7-2 Alphabetical printer messages (continued)
Message Description Action