pdhman.book : pdhapp.doc 40 Tue Oct 14 15:00:20 1997
40
PDH / DSn Testing With The HP 37717C
Cross Multiplexer Testing
2. Set up the display as
shown opposite.
The PAYLOAD TYPE determines the
Framing, which is selected from the
softkey menu.
Selections of Framing and Code must
match those of the network equipment.
3. Set up the display
as shown opposite.
The GAIN and EQUALIZER settings
should be set to optimize the received
signal.
4. Set up the display
as shown
opposite.
The required 2 Mb/s test signal is selected
under 34Mb: 8Mb: 2Mb
2M Payload determines the test signal
framing and must match that of the
network equipment.
TRANSMIT
RECEIVE
MAIN
SETTINGS
RECEIVE
STRUCTURED SETTINGS
To Next Page
Loading...
