EN Chapter 7 Troubleshooting 219
24 Unexpected internal error The data might be corrupted. Delete the
job that prompted the error.
Disk-media problem: Initialize the hard
disk or restart the printer to reinitialize the
RAM disk.
If the problem persists on a hard disk,
replace the hard disk.
55 Bad file system Data might be corrupted. Delete the job
that prompted the error.
Disk-media problem: Initialize the hard
disk or restart the printer to reinitialize the
RAM disk.
If the problem persists on a hard disk,
replace the hard disk.
56 Hardware failure Replace the hard disk.
59 The maximum number of
directories has been
reached
A maximum number of directories can be
put on a disk. Stored jobs are stored in
directories created for each user. To solve
this problem:
1. Delete all jobs stored for a user. The
firmware will automatically delete the
directory for a user with no stored jobs.
2. Delete other directories on the disk.
70 Disk error 1. Reseat the disk.
2. Replace the disk.
Table 38. Mopy disk error messages
Disk error
number Error description Solution