EN Chapter 3 Printer operation 57
Paper-handling menu
When paper-handling settings are correctly configured through the control panel, you can print by
choosing the type and size of media from the printer driver or software application.
Some items in this menu (such as duplex and manual feed) are available from a software application,
or from the printer driver (if the appropriate driver is installed). Printer driver and software application
settings override control panel settings.
Table 22. Paper handling menu
Item/Default value Values Explanation
ENVELOPE FEEDER
SIZE=COM10
(110 V printers)
or
SIZE=DL
(220 V printers)
For supported print media
sizes, see page 28.
This item appears only when the
optional envelope feeder is
installed. Set the value to
correspond with the envelope
size currently loaded in the
envelope feeder.
ENVELOPE FEEDER
TYPE=PLAIN
For supported print media
types, see page 28.
This item appears only when the
optional envelope feeder is
installed. Set the value to
correspond with the envelope
type currently loaded in the
envelope feeder.
TRAY 1 MODE=
FIRST
FIRST
CASSETTE
Determine how the printer will
use tray 1.
FIRST
: If print media is loaded in
tray 1, the printer will pull media
from that tray first.
CASSETTE
: A media size must be
assigned to tray 1 using the
TRAY 1 SIZE
option (the next item
in this menu when
TRAY 1
MODE=CASSETTE
). This allows
tray 1 to be used as a reserved
tray.
TRAY 1 SIZE=
LETTER
(110 V printers)
or
A4
(220 V printers)
For supported print media
sizes, see page 25
through page 27.
This item appears only when
TRAY 1 MODE=
CASSETTE
. Set the
value to correspond with the
media size currently loaded in
tray 1.
TRAY 1 TYPE=
PLAIN
For supported print media
types, see page 28.
This item appears only when
TRAY 1 MODE=
CASSETTE
. Set the
value to correspond with the print
media type currently loaded in
tray 1.
TRAY 2 TYPE=
PLAIN
For supported print media
types, see page 28.
Set the value to correspond with
the media type currently loaded in
tray 2.
To Next Page
Loading...