58 Printer operation EN
TRAY 3 TYPE=
PLAIN
For supported print media
types, see page 28.
This item appears only when a
third paper tray is installed. Set
the value to correspond with the
media type currently loaded in
tray 3.
TRAY 4 TYPE=
PLAIN
For supported print media
types, see page 28.
This item appears only when a
fourth paper tray is installed. Set
the value to correspond with the
media type currently loaded in
tray 4.
SMALL PAPER
SPEED=NORMAL
NORMAL
SLOW
Select
SLOW
when alternating
printing envelopes (or small
media sizes) and standard media
sizes and print problems appear.
Be sure to return the speed to
NORMAL
when finished.
When
SLOW
is selected, the printer
briefly pauses between pages to
reduce the possibility of a
repeating image.
MANUAL FEED=OFF OFF
ON
Feed the print media manually
from tray 1, rather than
automatically from a tray. When
MANUAL FEED=ON
and tray 1 is
empty, the printer goes offline
when it receives a print job and
displays
MANUALLY FEED
[PAPER
SIZE]
.
DUPLEX=OFF OFF
ON
This item appears only when an
optional duplexer is installed. Set
the value to
ON
to print on both
sides (duplex) or
OFF
to print on
one side (simplex) of a sheet of
paper.
BINDING=
LONG EDGE
LONG EDGE
SHORT EDGE
This item appears only when an
optional duplexer is installed and
DUPLEX=ON
. Choose the binding
edge when duplexing (printing on
both sides of paper).
Table 22. Paper handling menu (continued)
Item/Default value Values Explanation
To Next Page
Loading...