EN Chapter 3 Printer operation 59
CONFIGURE FUSER
MODE MENU=NO
NO
YES
Configure the fuser mode
associated with each print media
type. (This is only necessary if
you experience loose toner
problems, excessive curl, or other
print-quality issues when printing
on certain media types.)
NO
: The fuser-mode menu items
are not available.
YES
: Additional items appear (see
below).
Note
To see the default fuser mode for
each media type, select
YES
,
scroll back to the information
menu, and print a menu map.
[TYPE]=NORMAL NORMAL
HIGH1
LOW
HIGH2
This item appears only when
CONFIGURE FUSER MODE
MENU=YES
. Most paper types are
set to
NORMAL
fuser mode by
default. The exceptions are as
follows:
ROUGH=HIGH1
TRANSPARENCY=LOW
NORMAL
fuser mode provides a
fuser temperature for optimum
results on most typical papers.
HIGH1
fuser mode provides a
higher fuser temperature.
HIGH1
should be used with rough-
textured or heavy paper if you
have trouble with toner adhering
to the page.
LOW
fuser mode provides a lower
temperature, which can help
reduce curl on lightweight paper
and transparencies. However,
toner might not adhere as well to
the page.
HIGH2
fuser mode uses the same
higher temperature as
HIGH1
, but
it also slows printer throughput,
which creates the best fusing for
very rough paper.
Note
HIGH2
fuser mode only operates
for A4-, letter-, and legal-size
paper, and slows the throughput
to 16 pages per minute.
Table 22. Paper handling menu (continued)
Item/Default value Values Explanation
To Next Page
Loading...