72 Printer operation EN
CFG LINK=NO NO
YES
Select whether you want to manually
configure the HP JetDirect 10/100Base-
TX print server’s network link speed and
communication mode. The HP JetDirect
settings must match the network.
NO
: Bypass the link configuration menu
items.
YES
: Use the link configuration menu
items. One of the following link
configurations can be set:
AUTO
: The print server will automatically
configure itself to match the network’s
link speed and communication mode.
10T HALF
: 10 Mbps, half-duplex
operation.
10T FULL
: 10 Mbps, full-duplex
operation.
100T HALF
: 100 Mbps, half-duplex
operation.
100T FULL
: 100 Mbps, full-duplex
operation.
Table 27. EIO menu (continued)
Item Values Explanation
To Next Page
Loading...