Need help?Do you have a question about the HP 52 and is the answer not in the manual?
General| Panel Type | IPS |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Refresh Rate | 60 Hz |
| Viewing Angle | 178° horizontal, 178° vertical |
| VESA Mount | 100 x 100 mm |
| Response Time | 5ms |
| Contrast Ratio | 1000:1 |
| Connectivity | VGA, HDMI |
Specific power cord requirements for USA and Canada to ensure electrical safety.
Instructions on how to attach the tilt and swivel base to the monitor.
Guidance on selecting an appropriate and safe location for the monitor.
Overview of front panel controls for image quality, position, size, and shape adjustments.
Specific settings for horizontal/vertical centering, pincushion, and trapezoid correction.
How to reset the monitor to its default factory configurations.
How to adjust screen resolution for optimal information display and image quality.
Tips for reducing eye strain by using optimal refresh rates and avoiding flicker.
Explanation of Standby, Suspend, and Off modes for energy efficiency.
Recommendations for maximizing screen life and preventing image burn-in.
Instructions on how to safely clean the monitor's screen and coating.
Details of HP's general hardware warranty, including repair, replacement, and exclusions.
Requirements for establishing warranty validity through proof of purchase.
Exclusions and limitations on HP's express and implied warranties.
Information on HP's liability for damages and available remedies.
HP's warranty regarding Year 2000 compliance for date data processing.
Statement of product conformity to international safety and EMC standards.
Information regarding FCC compliance for radio frequency interference in the USA.
Details on x-ray emissions and safety compliance for the monitor.
Information on emission properties tested according to MPR guidelines.
Statement of compliance with Canadian Interference-Causing Equipment Regulations.
To Next Page
