HP 5335A - Section III Operation and Programming; Operating Characteristics

Operation and Programming
SECTION III
OPERATION AND PROGRAMMING
3-1. INTRODUCTION
3-2. This section provides the operating and programming information for the HP 5335A
Universal Counter. It explains the operating characteristics, operating functions, controls, and
all modes of operation. Detailed operating instructions, an operator’s check, and remote
programming information are provided in this section.
3-3. OPERATING CHARACTERISTICS
3-4. The 5335A is a system and benchtop universal counter. Basic functions include frequency,
period, time, ratio, totalize, and volts, inputs enter into two 200 MHz matched amplifiers and
are measured by the multiple register counter 1C (MRC). Raw data from the measurements are
used by the counter’s microprocessor to compute and format the result for display. Extensive
triggering and arming of the counter give the user great control over measurements. Math and
statistical functions give the user flexibility over how the measurement is displayed. The oper¬
ating range, resolution and accuracy for each individual functional mode of operation is given
in the Specifications, Table 1-1.
3-5. Description, operating and programming instructions for Options 020 and 030 are pro¬
vided in this section.
3-6. LOCAL OPERATION
3-7. The local operation of the HP 5335A is presented through the following subsections:
GENERAL OPERATION INFORMATION. The general operation information (starting
with paragraph 3-13) describes a variety of functionally nonspecific operating instruc¬
tions, operating characteristics, and indications. It provides a general overview of the
front panel operating controls and indicators.
FRONT AND REAR PANEL FEATURES. The front and rear panel features provides a
complete functional description of ail operator controls and indicators. This infor¬
mation compliments and expands on the front and rear panel foldouts. Figures 3-1
and 3-2.
DETAILED OPERATING INSTRUCTIONS. The detailed operating instructions (starting
with paragraph 3-93) present the most comprehensive information about each specific
measurement function. They are categorized by the labeled function mode (e.g., FREQ
A, PER A), and provide simple keystroke examples.
3-8. Additionally, the top cover of the instrument provides an Operating Instructions label.
This label summarizes the general operating instructions for most of the counter’s functions.
A copy of the Operating Instructions label is shown on a foldout at the end of this section.
3-9. REMOTE OPERATION
3-10. A description of remote programming operation begins with paragraph 3-151. A good
working knowledge of local operation is essential for HP-iB programming, as most of the Data
messages contain the same keystroke-like sequences. Where applicable, throughout this section,
3-
Model 5335A