HP 54520 Series - Page 119

no segments
S—- Channel |
y to seg #
ho segments
— maxes Q
enter changes
execute
all changes
more
DISPLAY (NORE
GREATER tc 1use
; from seg ® ——.
aa
Display Menu
Real-Time Acquisition Display Menu (sequential on)
More Exclude Include Softkey
Pressing this softkey brings up the segment exclude include softkey
menu.
Exclude Include softkey
This softkey is used to select which of the previously captured segments is
used for display operations. Press the softkey to highlight the desired choice.
Exclude Segments specified using the from seg #andto seg #
softkeys cannot be viewed in the normal mode, and are not used during
the average and envelope modes.
Include Previously excluded segments specified using the from seg
#andto seg #softkeys are now viewed, and are now used during the
average and envelope modes.
All segments are initially acquired as included. A list of currently included
segments are shown on the bottom left of the screen, along with a counter
showing the current segment used in the average, envelope, or normal (when
all segments is selected) mode.
From seg # softkey
This softkey is used to specify the beginning segment number when entering
the range of segments to be excluded or included from display operations.
Press the softkey to highlight the field, then use the keypad or knob to enter
desired value. Any positive value within the number of segments currently
acquired can be entered; however, the from seg # softkey entry cannot
exceed the to seg # softkey entry. The bottom of the softkey displays the
currently selected source.