HP 54520 Series - Displaying Functions

Math/FFT Menu
Displaying Functions
Presetting FFT Parameters
The FFT vertical parameters, magnify and center frequency are preset
whenever the operand or operator is changed.
Displaying Functions
In the single screen mode and with a function tuned on, the mathematical
results and the operands are displayed using the full display area.
In the 2-screen mode, functions 1 and 2 are displayed in the top half of the
screen, and functions 3 and 4 are displayed in the bottom half. In the
4-screen mode, each function is in its own area starting with function | at the
top of the waveform viewing area.
10-19