HP 54520 Series - Page 198

Utility Menu
HP-IB/RS-232 Menu
Plot The plot softkey allows you to choose what information the
oscilloscope sends to the plotter. There are five plot options: graticule,
display, factors, labeled, and all.
e Graticule plots only the graticules without waveforms or setup information.
e Display plots only the waveform data without the graticule or setup
information.
e Factors plots only the setup of the oscilloscope without graticules or
waveform data.
e Labeled plots the graticules, waveform data, and setup factors. Also, the
plotted image is reduced and a label is placed on the right side of the
paper for each channel that is turned on. Then, a line is drawn from each
label to its corresponding waveform.
® All plots the graticules, waveform data, and factors without labels.
Pen The pen softkey allows you to assign a pen color to nineteen of the
display parameters. You can assign any pen number from 1 to 8 to each
parameter for assorted plotter pen colors. You can select the following
parameters:
channels 1 to 4* x1 marker graticule
waveform memories 1to4 x2 marker trigger
pixel memories 1 and 2 yl marker time base
functions 1 to 4 y2 marker measurements
titles
* Channels 3 and 4 are available on 4-channe{ models only.
Exit Menu Softkey
The
exit
menu
softkey
returns
you
to
the
utility
menu.
|