HP 54520 Series - Page 63

Figure 4-3
11
12
13
Horizontal
Pan and Zoom
Set the time base back to 500 us/div, and set the waveform record to
512 points.
Press the Clear display key. Then, press the Stop/Single key.
Use the time/div knob to change the time base to 1 ms/div.
Because of the shorter record length, there is now only 5.12 ms of data in the
waveform record.
st
100 *Sa4
Because there is less data in the waveform record, you only need to zoom out
to 1 ms/div to have the entire waveform record on the display.
(612) =5.12 ms
fe stopped HOR IZ
1.0 v
1
W S500 us/div-
Foetal poe fins - delay 7)
D000 SI
L 9,000 s+
7 reference
left GMM right |
repetitive |
j
vential —~
|
(Mo
—record length —
5.00000 ms |
1.00 ms/diy realtime
-5.00000 ms
ARETE. se just
| 50 kSa/s |
‘sample clark —~'
4-10