HP 54522A - Page 287

Index
specifications, 14-3 to 14-4
input R, 14-3
rise tire, 14-3
time base, 14-4
trigger, 14-4
vertical, 14-3
voltage measurement accuracy, 14-3
spectral leakage, 10-14
Standard/Source softkey, 5-19
Standard/User defined softkey, 8-8
Start cal (calibration) softkey, 11-11
state trigger mode, 5-13
Statistic output softkey, 8-6
Statistics softkey, 8-5
Stop softkey, 8-19
Stop/Single key, 2-7
Store image menu, 12-16
Store menu, 12-13
storing
EPS files, 12-16
PCX files, 12-16
TIFF files, 12-16
System menu, 11-15
System util softkey, 11-17
rT
temperature characteristics, 14-23
test parameters preset, 8-10
Test softkey, 8-11, 8-15
text verbose format, 12~6
threshold calculations, 13-8
thresholds, 8-8
Thresholds/Measurements softkey, 8-8
throughput, 4-29
TIFF files, 12-16
time
negative, 5-3
positive, 5-3
sample points, 4-30
tag feature, 4-23
time base, 14-15
characteristics, 14~14
delay, 5-3
scaling, 4-4
specifications, 14-4
windowing, 4-6
Time base softkey menu, 4-3
time bucket, 4-16, 6-8, 11-19, 12-9
Time null menu, 11-13
Time out softkey, 11-7
time paramcters, 6-4
Time softkey, 11-13, 11-16
time tag, 6-11
Time/Div (division) softkey, 4-4
timing
definitions, 13-14 to 13-15
measurements, 13-9
To file softkey, 12-15, 12-17
To seg (segment) # (number) softkey,
6-13
To softkey, 8-17, 12-12
trace movement, 3-5
Trig’'d (triggered)/auto softkey, 5-4
trigger
basics, 5-3
characteristics, 14-6, 14-10
circuit, 5-11
delay mode, 5-15
delayed, 14-12
disabling, 5-14
disabling circuit, 5-8
edge, 14-11
glitch, 14-11
level, 5-5, 5-20
mode, 5-5, 14-11 to 14-13
on burst of pulses, 5-8
output, 14-21
pattern, 5-13, 14-11
pattern mode, 5-9.
point, 4-21
rearming, 2-7
sensitivity, 5-7
source, 5-13
specifications, 14-4
state, 14-12
status, 5-2
system, 11-18
TV, 14-12
TV signals, 5-19 to 5-20
Trigger on softkey, 5-17
Trigger softkeys, common, 5-4
triggered mode, 5-4
triggering
auto, 5-2
delay, 5-15, 5-17
edge, 5-11, 5-15, 5-17
triggering (continued)
glitch, 5-23
glitch polarity, 5-21
level, 5-21
modes, 5-2
patterns, 5-10, 5-13 to 3-14
points, 5-6, 5-21
source, 5-21
time, 4-5
TTL (Transistor Transistor Logic) softkey,
3-9
turning on, 2-17
TV trigger mode, 5-19
two-channel models, 3-2
Type softkey, 12-5, 12-14
U
undo autoscale, 2-5
Upper threshold softkey, 8-9
user defined mode, 13-16
Utility menu, 11-2
Vv
valid trigger, 5-3
value changing, 2-16
vertical, 3-2
adjustment, 3-5
characteristics, 14-5, 14-8 to 14-9
markers, 7-2
movement, 10-6
peak accuracy, 10-15
scaling, 3-4
scaling units, 10-15
sensitivity, 10-13
specifications, 14-3
Vertical sensitivity softkey, 3-4
vibration characteristics, 14-23
voltage measurement
accuracy specifications, 14-3
voltage measurements, 13-12 to 13-13
volts/div (division) knob, 3-2
Vs (versus) function, 10-3
Index-6