HP 54540 Series - Page 133

See Also
Define Measure Menu
Measure Menu
Markers When markers is selected, you can use the x] and x2 markers
to window the data on the display. Then, measurements are made on the
data displayed within the window set by the markers. You turn on and
position the markers from the marker menu.
By using the markers to set the measurement window, you can make a
measurement on a particular portion of the data rather than on all of the data
displayed on the screen.
Chapter 7, “Marker Menu," for information on positioning the markers.
Extended Analysis
The continuous softkey must be on before the extended analysis
softkey is available. When extended analysis is turned off, certain
measurements (like period, frequency, +width, and —width) are made on the
first pulse or period that is displayed on the screen. When extended analysis
is turned on, measurements are made on all pulses or periods that are
displayed on the screen, and the results are averaged together.
Statistic Output Softkey
The continuous softkey must be on before the statistics output softkey is
available. The statistics output softkey determines which set of
statistics are displayed on the screen. The choice is either the minimum,
maximum, and average values or the average and standard deviation values.
8-6