5
Set the time base to 200
µ
s/div, then center the signal on the display
with the delay knob (delay about 800
µ
s).
6
Press
Main/Delayed
, then press the
Delayed
softkey.
7
Set the delayed sweep to 20
µ
s/div, then set the expanded portion
over the VITS (delay about 988.8
µ
s).
Second VITS Displayed
This figure shows the
second vertical
interval test signals
displayed with delayed
sweep.
Figure 3-10
Using Option 005 Enhanced TV/Video Trigger (HP 54602B)
To analyze video waveforms with Option 005
3–17
To Next Page
Loading...
