HP 54600 Series - Page 354

Reference
Designator
HP Part
Number
Qty Description
MP8 54601-41902 1 Small rubber keypad
MP9 54645-42202 1 Front panel
MP10 54601-43701 1 Power-switch shaft
MP11 54601-64401 1 Cabinet (comes with handle and feet installed)
MP12 54601-44901 1 Handle
MP13 54601-47401 7 Small knob (HP 54600 has 6)
MP14 54601-47402 3 Large knob
MP15 54601-47403 1 Intensity knob
MP16 54601-47404 1 Small knob (dark)
MP17 5081-7741 1 Safety shield sheet
W1 8120-1521 1 Standard power cord
W1 8120-1703 Power cord option 900, United Kingdom
W1 8120-0696 Power cord option 901, Australia
W1 8120-1692 Power cord option 902, Europe
W1 8120-0698 Power cord option 904, 250 V, USA/Canada
W1 8120-2296 Power cord option 906, Switzerland
W1 8120-2957 Power cord option 912, Denmark
W1 8120-4600 Power cord option 917, Africa
W1 8120-4754 Power cord option 918, Japan
Option 101 Accessory pouch and front-panel cover.
5041-9411 Pouch
54601-44101 Front-panel cover
Attenuator covers replacement parts (these are a part of the A3 system board)
54601-04101 Channel attenuator cover (one used on HP 54600B and
HP 54603B, two used on HP 54601B and HP 54602B)
0515-0667 M3 x 25 machine screw that holds attenuator cover to
system board
54645-21701 Spacer that goes between system board and attenuator
cover. M3 x 25 machine screw goes through spacer.
Service
Replacing Parts in the Oscilloscope
4–61