HP 5500 EI series Specifications

Note 6 If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Note 7 If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis
and integrated to the JG506A - HP 55xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Remark:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)
Rack Level Integration CTO Models
Switch Chassis
HP 5500-24G EI Switch JD377A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; autosensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 port expansion module slots
Power Supply included
1U - Height
See
Configuration
Note:1, 3, 10
PDU CABLE NA/MEX/TW/JP JD377A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW JD377A#B2C
C15 PDU Jumper Cord (ROW)
HP 5500-24G-SFP EI Switch JD374A
24 fixed Gigabit Ethernet SFP ports
8 dual-personality ports; autosensing 10/100/1000Base-T or SFP
min=0 \ max=32 SFP Transceivers
2 port expansion module slots
1 - JD362A - HP 5500 150WAC Power Supply Included
1U - Height
See
Configuration
Note:1, 3, 10
PDU CABLE NA/MEX/TW/JP JD374A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
QuickSpecs
HP 5500 EI Switch Series
Configuration
DA - 13808 North America — Version 27 — January 16, 2014 Page 11

HP 5500 EI series Specifications

General

Brand	HP
Model	5500 EI series
Category	Switch
Language	English