HP 5500 EI series Specifications

HP RPS 800 Redundant Power Supply JD183A
Height = 1U
includes 1 x c13
See Configuration
Note:2,4,6
HP RPS1600 Redundant Power System JG136A
Height = 1U
includes 1 x c13, 1600w and Power Supply port
See Configuration
Note:2, 3,5
HP RPS1600 1600W AC Power Supply JG137A
Installs into JG136A only See Configuration
Note:1, 3
Configuration Rules:
Note 1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or
onsite.
Note 2 Localization required.
Note 3 Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
Note 4 Supported only on the JD377A, JG250A, JD375A and JG251A Switches
Note 5 Supported only on the JG241A, JG252A, JG240A and JG253A Switches
Note 6 Each switch will only support 1 JD183A Power supply.
Options for the HPN 5500 Power Supplies
HP X290 1000 A JD5 2m RPS Cable JD187A
HP X290 1000 A JD5 Non-PoE 2m RPS Cable JD188A
HP X290 1000 B JD5 2m RPS Cable JD189A
HP X290 500/800 1m RPS Cable JD190A
HP X290 500 U 1m RPS Cable JD185A
Remarks: These cables are used to connect the External Power System to Switch.
Modules
(std 0 // max 2) User Selection (min 0 // max 2) per switch enclosure
HP 5500 2-port 10GbE XFP Module JD359B
min=0 \ max=2 XFP Transceivers See Configuration
Note:2, 5
QuickSpecs
HP 5500 EI Switch Series
Configuration
DA - 13808 North America — Version 27 — January 16, 2014 Page 15

HP 5500 EI series Specifications

General

Brand	HP
Model	5500 EI series
Category	Switch
Language	English