Replace the ink-collection unit
●
Introduction
●
Remove and replace the ink-collection unit
Introduction
The following information provides details about the ink-collection unit for the printer, and it includes
instructions to replace it.
The printer indicates when the ink-collection unit is nearly full and when it is completely full. When it is
completely full, printing stops until the ink-collection unit is replaced.
To purchase a ink-collection unit (part number B5L09A), go to the HP Parts Store at www.hp.com/buy/parts.
NOTE: The ink-collection unit is designed for a single use. Do not attempt to empty the ink-collection unit
and reuse it. Doing so could lead to pigment being spilled inside the printer, which could result in reduced print
quality. After use, return the ink-collection unit to HP’s Planet Partners program for recycling.
Remove and replace the ink-collection unit
1. Open the left door.
2. Remove the ink-collection unit by pulling it out
with both hands. Set the unit aside, upright, on a
piece of paper to prevent spills.
CAUTION: When pulling out the ink-collection
unit, avoid making direct contact with the black
cylinder to prevent pigment smear on skin or
clothes.
50 Chapter 3 Supplies, accessories, and parts ENWW
To Next Page
Loading...