HP 635n - JetDirect IPv6/IPsec Print Server - Page 50

50
Select “Radius
Standard”
from the drop
down list for
“Client-
Vendor”.
To
communicate
with the radius
server, a
shared secret
needs to be
established.
Use the same
value as
configured on
the switch.
Click “Finish”.
Now that we have a client defined, we can define a Remote Access Policy. Don’t let the “Remote
Access” terminology confuse you. RADIUS was originally designed to Authenticate Dial-In users –
However it has been adapted into a variety of functions – one of these is 802.1X Authentication.
Let’s go ahead and define a Remote Access Policy for Printing and Imaging Devices. We’ll call it PID.
Back to the
main screen of
IAS, highlight
“Remote
Access
Policies”.