To Next Page

To Previous Page

2. Remove the memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the

memory module slot.

Reverse this procedure to install the internal memory module.

RTC battery

NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all

passwords and CMOS settings to be cleared.

Description Spare part number

RTC battery 449137-001

Before removing the RTC battery, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 48).

5. Remove the memory/WLAN module compartment cover (see

Expansion memory module

on page 56).

6. Release the keyboard (see

Keyboard on page 64).

Remove the RTC battery:

Component replacement procedures 67

Questions and Answers:

Need help?

Do you have a question about the HP 6710b - Compaq Business Notebook and is the answer not in the manual?

HP 6710b - Compaq Business Notebook Specifications

General