HP 67W83UA - Solid-State Drive Specifications

Table 9-2 Display specications
Metric U.S.
Active diagonal size 35.6 cm 14.0 in
Resolution 1920 × 1080 (FHD)
Surface treatment Antiglare
Brightness 250 nits
Viewing angle UWVA (FHD panels)
Backlight WLED
Display panel interface eDP
Solid-state drive specications
This section provides specications for your solid-state drives.
Table 9-3 Solid-state drive specications
128 GB* 256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 1.0 ms 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MBps up to 2150 MBps up to 2150 MBps up to 2150 MBps
Random read Up to 300,000
IOPs
Up to 300,000
IOPs
Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MBps up to 1550 MBps up to 1550 MBps up to 1550 MBps
Random write Up to 100,000
IOPs
Up to 100,000
IOPs
Up to 100,000 IOPs Up to 100,000 IOPs
Total logical sectors 234,441,648 468,883,296 1,000,215,216 1,500,336,388
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specications can
dier slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Solid-state drive specications 77