HP 6800 Series - Page 152

1. Align the arrows
Note: To print on legal-sized paper, set the paper-width guide to LTR.
3. Set the paper-width fence by carefully inserting it into the appropriate slots.
1. Tilt the fence forward.
2. Insert the fence into the appropriate slots
3. Tilt the fence back until it locks into place
Note: To print on legal-sized paper, set the paper-width fence to LTR.
4. Set the paper-length guide by pulling it until the arrow lines up with the paper
size.
HP Deskjet 6800 series printer User's Guide
152