Power Cable
In accordance with international safety standards, t,his
instrument is equipped with a three-wire power cable.
When connected to an appropriate AC power receptacle,
rhis cable grounds the instrument cabinet. The type of
power cable shipped with each instrument depends on
the country of destinat,ion. Refer to Figure 1-l for the
part numbers of the power cables available.
Warning
To avoid
the
possibility of
injury or death, the
precautionary Mrnings given on
the
inside
front-cover of the manual most
be
followed
before
the
instrument is switched on.
Figure l-l. Power Cables - Plug Identification
The following work should be carried out, by a qualified
electrician all local electrical codes being strictly
observed. If the plug on the cable does not fit the power
outlet., or the cable is to be att,ached to a terminal block,
cut the cable at the plug end and re-wire it.
The color coding used in t.he cable will depend on the
cable supplied. If a new plug is to be connected, it must
Installing the
HP 8110A l-3
To Next Page
Loading...
