IF-Display Section General Information
IF-Display Section Service
Introduction
This Troubleshooting and Repair Manual contains information for the troubleshooting and
repair of the IF-Display Section of the instrument. This information is combined in service
sheets and indexed with tabs for quick reference.
Instruments Covered by This Manual
- HP 85662A IF-Display Sections, serial number prefixes 2403A and above.
- Option 067 (1 kHz to 3 MHz Resolution Bandwidths for the HP 8567A Spectrum Analyzer),
■ Option 400 (400 Hz operation)
- Option 462 (Impulse Bandwidths)
- Option H96 (30 Hz-l MHz Resolution Bandwidths)
HP 85662A IF-Display Sections with serial number prefixes below 24038 are covered in both
Volume 3 of the HP 8566A Operating and Service Manual (HP part number 08566-90006) and
Volume 3 of the HP 85688 Operating and Service Manual (HP part number 08568-90012).
How the HP 85662A Is Used
- HP 85662A IF-Display Section is used with:
□ HP 85660B RF Section as the HP 8566B Spectrum Analyzer
□ HP 85680B RF Section as the HP 8568B Spectrum Analyzer.
■ Option 462 is used with:
□ HP 85660B RF Section as the HP 8566B Option 462 Spectrum Analyzer
□ HP 85680B RF Section as the HP 8568B Option 462 Spectrum Analyzer
- Option 067 is used with:
□ HP 856708 RF Section as the HP 85678 Spectrum Analyzer
- Option H96 is used with:
• I HP 85680B Option H96 as the HP 8568B Option E96 Spectrum Analyzer
o HP 85680B Option H44 as the HP 8568B Option E44 Spectrum Analyzer.
IF-Display Section General Information 1
To Next Page
Loading...
