To Next PageTo Next Page
Need help?Do you have a question about the HP 8591C and is the answer not in the manual?
General| Resolution Bandwidths | 1 Hz to 3 MHz |
|---|---|
| Input Impedance | 50 ohms |
| Video Bandwidth | 1 Hz to 1 MHz |
| Third Order Intercept | +20 dBm |
| Input VSWR | < 1.5:1 |
| Display | CRT |
| Amplitude Accuracy | +/- 1.5 dB |
| Phase Noise | -100 dBc/Hz |
| Dimensions | 470 mm (18.5 in) D |
Outlines the warranty terms for software and media.
Provides essential safety precautions for analyzer operation.
Specifies the necessary firmware version for analyzer operation.
Details hardware and firmware compatibility for spectrum analyzers.
Provides steps to prepare the analyzer for cable TV measurements.
Outlines the procedure to remove the HP 85721A personality.
Explains the steps for performing channel measurements.
Measures the ratio of carrier to noise.
Measures relative levels of inter-modulation products.
Computes total power within the specified bandwidth of a channel.
Tests flatness of an individual cable TV channel.
Compares frequency response at different system points.
Describes creating and saving test plans for system measurements.
Explains how to schedule tests for later execution.
Details the process of building a test plan.
Lists and explains common error messages and their solutions.
Addresses issues not indicated by error messages.
Initiates immediate testing and sends results.
Specifies the date and time to begin timed measurements.
Accesses the system measurement mode.
Provides access to functions for initiating tests at a later time.
Measures the ratio of carrier peak level to noise.
Measures relative level of second order inter-modulation products.
Measures relative level of third order inter-modulation products.
