I
-
Deleting Individual Files from a RAM Card
1. Ensure the write-protect switch is set so that the RAM card is not write
protected.
2. Insert the RAM card in the card reader.
3. Press
(SAVE_]
or
(RECALL).
4.
Press INTERNAL CARD so that CARD is underlined.
5.
Press Catalog Card , CATALOG ALL
6. Turn the large knob on the analyzer’s front panel until the file that you
want to delete is highlighted.
7.
Press DELETE FILE, DELETE FILE.
8. If SYSTEM is still displayed in the upper-right corner of the analyzer
display, you can press
@ZK)
[KKK]
to return to the current cable TV
measurements menu.
You may want to delete one or more
tiles
from the RAM card to make room
for new liles to be stored on the RAM card.
3-39
To Next Page
Loading...
Need help?
General
