I
-
If You Have a Problem
Other Problems
If the wrong date or time is displayed
The analyzer has a real-time clock that is powered by an internal battery.
If the real-time clock is set to the wrong time or date, use the following
procedure to reset the time and date:
1. Press
@GiC),
TIMEDATE
2. If the time and date are not displayed in the upper-left corner of the
analyzer screen, press
TIMEDATE
ON OFF so that ON is underlined.
3.
To reset the time, press SET TIME , enter the time (in 24-hour format) in
the hour, minute, second format using the data keys, then press
C-1.
For example, entering 133010 corresponds
1:30:10
PM.
4. To reset the date, press SET DATE , enter the date in the year, month, day
format, then press
[ENTER).
For example, entering 910305 corresponds to
March 5, 1991.
4-15
To Next Page
Loading...
