HP 8591C

TV Receiver, Setup, and AUX CTRL Menu Maps and Softkey Descriptions
Softkey Descriptions
USR CH 0 CNTR FRQ Description
Allows you to define the center frequency for a user defined channel. This
channel is then accessed by selecting channel 0 (zero). The setting defined
here is stored in nonvolatile analyzer memory. This means that the analyzer
retains the setting, even when power is turned off, until a new setting is
made.
Press CABLE TV ANALYZER , Setup , Channel Tuning to access
CHNL 0 CNTR FRq
See Also
“Step 1. Configure the test system” in Chapter 2.
USR CH 0 SPAN Description
Allows you to define the span for a user defined channel. This channel is
then accessed by selecting channel 0 (zero). The setting defined here is stored
in nonvolatile analyzer memory. This means that the analyzer retains the
setting, even when power is turned off, until a new setting is made. Press
CABLE TV ANALYZER , Setup , Channel Tuning to access CHNL 0 SPAN
See Also
“Step 1. Configure the test system” in Chapter 2.