System Measurements Menu Map and Softkey Descriptions
System Measurements
Softkey
Function Descriptions
DONE
Description
Allows you to indicate that you have finished making your selection.
(The DONE softkey should not be confused with the DONE programming
command.
)
DUMP
TO
PRINTER
Description
Allows you to have the test results sent to a printer when using
Measure Now or Timed Measure The printer needs to be connected to
the analyzer.
Figure 6-5 shows an example printout. Table 6-3 explains the different items
on a printout.
Press Measure Now , Yes or No , or Timed Measure to access
DUMP TO PRINTER.
6-13
To Next Page
Loading...
