I
-
Formatting a RAM Card
1. Check that the switch on the RAM card to be formatted is set so the card
is not write protected.
2. Insert the RAM card into the analyzer with the card’s arrow matching the
raised arrow on the bezel around the card-insertion slot.
3. Press
@iG@,
MORE
1
of 3 , Card Conf
ig
.
4.
Press FORMAT CARD , FORMAT CARD This formats the RAM card.
5. If SYSTEM is still displayed in the upper-right corner of the analyzer
display, you can press
@iGiK),
(MODE) to return to the current cable TV
measurements menu.
Before you use the RAM card for the first time, you must format the RAM
card. Once the RAM card has been formatted, the test plan and test data can
be saved on it.
Figure 3-18. A RAM Card
3-37
To Next Page
Loading...
Need help?
General
